Online CEMS Gas Analyzer Monitoring System For Nitrogen Oxide
| Product Name: | Continuous Emission Monitoring System For Nitrogen Oxide Of Flue Gas | Pretreatment: | Condensing Method |
| Nitrogen oxide measurement: | Converting Ovens | Measure Method: | UV Differential Method |
| Detection Item: | SO2, NOx, O2 | Product Package: | Wooden Case Or Customization |
| High Light: | Online cems gas analyzer,Nitrogen Oxide cems gas analyzer,cems monitoring system Analyzer |
||
CEMS Online Continuous Emission Monitoring System for Nitrogen Oxide of Flue Gas
Product Introduction
The CEMS1250 continuous emission monitoring system consists of four sub-systems: monitoring of gaseous pollutants (SO2, NO, O2, etc.), monitoring of flue gas parameters (temperature, pressure, flow rate, humidity, etc.) and data acquisition and data processing. It can continuously monitor SO2, NO, O2, soot concentration, flue gas temperature, pressure, flow rate, humidity and many other relevant parameters, and count the emission rate, total emission, etc.
Product Parameter
|
Product Name |
CEMS Online Continuous Emission Monitoring System for Nitrogen Oxide of Flue Gas |
|
Product Size |
930*730*2010mm |
|
Weight |
177KGS |
|
Measure Method |
UV Differential Method |
|
Nitrogen Oxide Measurement |
Heat Resistance Moisture Meter |
|
Contaminant Range |
SO2 concentration 0-45/100 mg/m3 NOX concentration 0-45/100 mg/m3 O2 content 0-25% |
|
Pre-processing |
Condensing Method |
|
Humidity meter measurements |
Heat Resistance Moisture Meter |
|
Oxygen content |
Electrochemical |
Product Performance
1. High reliability
1.1 The use of a xenon light source with a service life of 10 years.
1.2 Gas analyzer adopts grating spectroscopy and array sensing, no moving parts, high reliability
2. Easy maintenance, low maintenance cost
2.1 Simple system wiring, easy installation and maintenance.
2.2 The light source, gas chamber and spectrometer are connected by optical fibre, which makes the maintenance and replacement of each part simple and low cost.
3. High measurement accuracy
SO2, NO gas analysis using differential absorption spectroscopy (DOAS) technology, effectively solve the impact of water and other factors on the measurement accuracy.
Industry Application
Industrial pollutant gases
Thermal power plants
Industrial kilns, industrial boilers
Residential heating boilers.
Outdoor Air Pollution Cems System Emissions Monitoring Equipment
Outdoor Air Pollution Monitor Detector Continuous Emission Monitoring System for Flue Gas Product Introduction The continuous emission monitoring system consists of a gaseous pollutant monitoring subsystem, a particulate matter monitoring subsystem, a flue gas parameter monitoring subsystem and a ...
Ultra-Low Particulate Monitor with Full-Process Zero Calibration | LD1200A
Ultra-Low Particulate Monitor with Full-Process Zero Calibration | LD1200A Product Introduction LD1200A Ultra-Low Particulate Matter Monitor adopts an integrated high-temperature extraction system. It uses internally polished stainless steel pipes connected directly to the detector via high...
Industrial CO2 NH3 Cems Continuous Laser Emission Monitoring System Gas Analyzer
Continuous Laser Gas Analyzer for Industrial Gases and Environmental Flue Gases Detection Product Introduction The laser gas analyzer can measure flue gas with high temperature (1500 ℃), high pressure (3bar) and high dust (500g/m3) and can realize in-situ analysis in the work site; and the ...
CEMS1900 Flue Gas Emission Monitoring System (FTIR)
Outdoor Air Quality Monitor Continuous Emissions Monitoring System for Flue Gas Product IntroductionThis system adopts Fourier infrared absorption technology to realize the measurement of gaseous pollutants in the flue gas of domestic waste incineration, hazardous waste and solid waste incineration. ...
- Email:export@wayeal.com.cn
- Tel:+8613586823203
- WhatsApp:8613586823203
- WeChat:+8613586823203
