DOAS Environmental Continuous Emissions Monitoring System 176KG
| Product Name: | Contimuous Emissions Monitoring System | Size: | 930*730*2010mm |
| Weight: | 176KGS | Measure Method: | UV Differential Method |
| Usage: | SO2, NOX, O2 Monitor | Measurement Range: | SO2: 0-100/200 Mg/m3, NOX: 0-100/200 Mg/m3, O2: 0-25% |
| High Light: | Continuous Emissions Monitoring System DOAS,176KG Continuous Emissions Monitoring System,DOAS continuous environmental monitoring system |
||
Contimuous Emissions Monitoring System for Environmental Flue Gas Emission Detection
Product Introduction
The CEMS 1200 system consists of a gaseous pollutant monitoring sub-system, a particulate matter monitoring sub-system, a flue gas parameter monitoring sub-system and a data acquisition and processing sub-system. It can continuously monitor SO, NOx, O2, CO, CO2, HCI, soot (particulate matter) concentration, flue gas flow rate, flue gas pressure, flue gas humidity and many other relevant parameters as well as statistical emission rates and total emissions.
Product Parameter
| Product Name | Contimuous Emissions Monitoring System for Environmental Flue Gas Emission Detection |
| Diamension | 930*730*2010mm |
| Weight | 175KGS |
| Measure Method | UV Differential Method |
| Nitrogen Oxide Measurement | Heat Resistance Moisture Meter |
| Contaminant Range | SO2 concentration 0 - 100/200 mg/m3
NOX concentration 0-100/200 mg/m3
O2 content 0-25%
|
| Pre-processing | Hot-wet Method |
Product Performance
1. High reliability
Gas analyser with pulsed xenon lamp light source for a 10-year service life.
High reliability due to the use of grating spectroscopy and array sensors with no moving parts.
The dust detector is of an integrated design, compact and highly reliable.
2. High measurement accuracy
The measurement of SO2 and NOx is carried out by the hot-wet method (temperature between 120°C and 200°C can be set), avoiding the inaccuracy of the measurement due to the absorption of SO2 by condensate and the corrosion of the instrument by the formation of sulphite.
SO2 and NOx gas analysis using differential absorption spectroscopy (DOAS), effectively addressing the effects of water, dust and other factors on measurement accuracy.
Industry Application
Steel plants, cement plants, chemical plants.
Outdoor Air Pollution Cems System Emissions Monitoring Equipment
Outdoor Air Pollution Monitor Detector Continuous Emission Monitoring System for Flue Gas Product Introduction The continuous emission monitoring system consists of a gaseous pollutant monitoring subsystem, a particulate matter monitoring subsystem, a flue gas parameter monitoring subsystem and a ...
Ultra-Low Particulate Monitor with Full-Process Zero Calibration | LD1200A
Ultra-Low Particulate Monitor with Full-Process Zero Calibration | LD1200A Product Introduction LD1200A Ultra-Low Particulate Matter Monitor adopts an integrated high-temperature extraction system. It uses internally polished stainless steel pipes connected directly to the detector via high...
Industrial CO2 NH3 Cems Continuous Laser Emission Monitoring System Gas Analyzer
Continuous Laser Gas Analyzer for Industrial Gases and Environmental Flue Gases Detection Product Introduction The laser gas analyzer can measure flue gas with high temperature (1500 ℃), high pressure (3bar) and high dust (500g/m3) and can realize in-situ analysis in the work site; and the ...
CEMS1900 Flue Gas Emission Monitoring System (FTIR)
Outdoor Air Quality Monitor Continuous Emissions Monitoring System for Flue Gas Product IntroductionThis system adopts Fourier infrared absorption technology to realize the measurement of gaseous pollutants in the flue gas of domestic waste incineration, hazardous waste and solid waste incineration. ...
- Email:export@wayeal.com.cn
- Tel:+8613586823203
- WhatsApp:8613586823203
- WeChat:+8613586823203
