Send Message
news
Home > news > Company news about Determination the Content of Acyclovir by High Performance Liquid Chromatography
Events
Contact Us

Determination the Content of Acyclovir by High Performance Liquid Chromatography

2024-09-05

Latest company news about Determination the Content of Acyclovir by High Performance Liquid Chromatography

Determination the Content of Acyclovir by High Performance Liquid Chromatography

 

The analytical method introduced in this article, with reference to the 2020 edition of the Pharmacopoeia of the People's Republic of China in Acyclovir test method, by using Wayeal high performance liquid chromatograph LC3200 series with a DAD detector.

 

1. Instrument Configuration and Experiment Method

 

1.1 Instrument Configuration

No Name Qty
1 P3210Q Quaternary Pump 1
2 CT3400 Column Oven 1
3 AS3210 Autosampler 1
4 DAD3260 DAD Detector 1
5 Nova Atom PC18 4.6x250mm 5μm 1
6 Chromatography Workstation 1

 

1.2 Experiment Method

 

1.2.1 Reagents Preparation

 

Table 2 List of Reagents

No Reagents Purity

1

2

3

4

5

Methanol

Phosphoric acid

Sodium hydroxide

Acyclovir

Guanine

Chromatographic Purity(LC)

GR

MOS

98%

99%

 

1.2.1.1 Test solution: Take 40mg of sample into a 200mL measuring flask, add 2mL of 0.4% sodium hydroxide to dissolve it, then add 25mL of 0.1% (V/V) phosphoric acid solution and dilute it with water to the scale, shake well.

 

1.2.1.2 Reference solution: Take 1mL of the test solution into a 100mL measuring flask, add 5mL of 0.1% phosphoric acid solution, dilute with water to scale and shake well.

 

1.2.1.3 Guanine control storage solution: Take 10mg of guanine reference into a 50mL measuring flask, add 5mL of 0.4% sodium hydroxide solution to dissolve it, then add 5mL of 0.1% phosphoric acid solution, dilute it with water to the scale, shake well.

 

1.2.1.4 Guanine reference solution: Take 1mL of guanine reference storage solution into a 100mL flask, dilute with water and shake well.

 

1.2.1.5 System suitability solution: Take appropriate amount of each of the reference solution and guanine reference solution, mix in equal volume and shake well.

 

1.2.2 Chromatography Condition

 

Table 3 Chromatography Conditions

Chromatography Column Nova Atom PC18 Chromatography Column, 4.6*250mm, 5μm
Mobile Phase Mobile Phase A: Water Mobile Phase B: Methanol
Flow Rate 1mL/min
Column Temperature 35°C Wavelength 254nm
Injection Volume 20μL

 

Table 4 Mobile Phase Ratio

Time (min) Mobile Phase A Mobile Phase B
0 94 6
15 94 6
40 65 35
41 94 6
51 94 6

 

2. Experiment Result

 

2.1 System Suitability Solution

latest company news about Determination the Content of Acyclovir by High Performance Liquid Chromatography  0

Fig 1 Test Chromatogram of System Suitability Solution

 

Table 5 Test Data System Suitability Solution

No Compound Retention Time Peak Area Theoretical plate number Separation
1 Guanine 5.698 138.675 17173 12.334
2 Acyclovir 8.425 139.902 15786 n.a.

 

Note: From the above graph and the data in the table, it can be seen that Acyclovir and Guanine have better peak shapes and high theoretical plate number. The degree of separation is more than 3.0, which meets the requirements in pharmacopoeia.

 

2.2 Repeatability

latest company news about Determination the Content of Acyclovir by High Performance Liquid Chromatography  1

Fig 2 Repeatability Chromatogram of 6 Injections of System Suitability

 

Table 6 Repeatability Data of 6 Injections of System Suitability Solution Retention Time

Sample No Guanine Acyclovir

 

 

 

Retention Time

1 5.698 8.408
2 5.701 8.415
3 5.705 8.411
4 5.701 8.405
5 5.705 8.401
6 5.705 8.398
RSD (%) 0.048 0.074

 

 

Table 7 Repeatability Data of 6 Injections of System Suitability Solution Peak Area

Sample No Guanine Acyclovir

 

 

 

Peak Area

1 136.997 138.836
2 138.496 139.117
3 137.783 139.505
4 136.663 138.204
5 137.755 137.968
6 137.789 139.374
RSD (%) 0.475 0.452

 

Note: According to the data in the above table, the RSD of retention time of guanine and acyclovir in the system suitability solution is 0.048% and 0.074%, and the RSD of peak area is 0.475% and 0.452%, respectively. The reproducibility results are good and meet the experimental requirements.

Send your inquiry directly to us

Privacy Policy China Good Quality Helium Leak Detector Supplier. Copyright © 2022-2024 Anhui Wanyi Science and Technology Co., Ltd. . All Rights Reserved.